Strymon Lex Rotary Speaker Simulator V2 Overview
The Lex delivers authentic rotary speaker tones in a compact pedal and features a host of enhancements as part of its second-generation update.
There is something uniquely powerful about the sound of a vintage rotary speaker system. The organic chorusing as the treble horn and bass rotor start speeding up. The grit of the internal tube-driven amplifier creates additional harmonics that spin around the room. Plug into Lex, close your eyes, and be transported by this classic sound, recreated with astonishing realism and depth for your pedalboard.
What’s new in Lex version 2?
Strymon’s second-generation Lex gives you the same rich rotary sounds of our original and adds significant new features, incorporating technological advancements, hardware improvements and design enhancements to give you additional flexibility, power, and ease of use on stage and in the studio.
User Interface
A more powerful and intuitive user interface gives you instant control over mic position and distance, dry level, acceleration speed, volume boost/cut, and easy customization of rotor speed. Everything you need for the full rotary speaker experience is at your fingertips.
Hardware Improvements
A premium analogue JFET input circuit ensures superb responsiveness to your playing, and you can select mono or stereo input with the flick of a rear-panel switch. All this, plus a new ARM DSP chip provides more processing power for every sonic nuance, with less energy consumption on your pedalboard.
MIDI
Full MIDI implementation means you can control just about every switch, knob, and setting remotely by sending MIDI commands from your controller or DAW via Lex’s EXP/MIDI jack or USB-C connection. Rotor speed can be synchronized via MIDI Clock Sync, and the sync setting can be saved for each preset. 300 MIDI preset locations are available for loading and saving your favourite settings.
The Complete Rotary Speaker System.
Lex provides you with a complete, accurately reproduced rotary speaker system: the low-frequency bass rotor, the rotating treble horn, the tube-driven amplifier, finely tuned microphone placement, and all the complex sonic interactions between these elements. Powerful, intuitive controls mean you can quickly dial in just the customized sound you desire.
The second-gen Lex is a superb way to add the warm crunch and lush chorusing of a vintage rotary speaker to your guitar or keyboard’s sound whilst giving you a tone of tonal flexibility.
- Classic sound of the most sought-after rotary speaker system
- Control of rotor speed, horn level, acceleration time, microphone distance, tube drive, saturation and volume level
- Accurate reproduction of LF bass rotor, rotating treble horn, tube-driven amplifier, mic placement, and all the complex sonic interactions between these elements
- Rotary Brake and bi-amping control
- Expression pedal input for any front-panel knob parameter
- Four rotary adjustment and tone shaping knobs: Fast Rotor Ins, Outs, Switches
- Ultra low noise, high performance 24-bit 96kHz A/D + D/A converters, 110dB typical SNR and 32-bit float-point processing • TRS stereo input (with stunning new JFET preamp) and output, plus MONO/STEREO input switch on the back of the unit
- Full MIDI control, MIDI clock sync and 300 presets
- USB port for updates and MIDI over USB
- TRS MIDI jacks: allow bi-directional MIDI communication with a single cable using the Conduit interface
- Editor/librarian support via USB
- High impedance ultra low-noise discrete Class A JFET TRS stereo input.
- Low impedance independent TS stereo outputs.
- Expression pedal input allows the connection of a TRS expression pedal, MiniSwitch, MultiSwitch Plus, or TRS MIDI connection.
- USB jack for controlling via MIDI from a computer or for performing firmware updates.
- Dedicated Slow/Fast rotary speed & On/Off footswitches
- Premium JFET analog front end
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
- 520MHz ARM Superscalar processor
- 32-bit floating point processing
- 20Hz to 20kHz frequency response
- Audio Input Impedance: 1M Ohm
- Audio Output Impedance: 100 Ohm
- Strong and lightweight anodized brown aluminum chassis
- 9V DC power supply included
- Power requirements: maximum 9 volts DC center-negative, with a minimum of 300mA of current
- Dimensions: 4.5” deep x 4” wide x 1.75” tall / 11.4 cm deep x 10.2 cm wide x 4.4 cm tall
- Designed and built in the USA