The Seymour Duncan Shape Shifter Tremolo was designed to be the ultimate stereo Tremolo pedal, with every standard tremolo feature included, and then some! Building on Duncan's original Shape Shifter the new version is significantly smaller and full stereo. An expanded rate range gives access to far more variation than before whilst a blinking LED gives you a visual key, and even works when the pedal's bypassed so you always know where you stand. The Shape Shifter provides a natural, first-class sound that is rich, authentic and highly customisable. Wave, Shape, Depth, Speed and Tap Tempo controls allow you infinite ability to craft your own unique signature Tremolo tones, while the Phase control lets you adjust between left and right output channels to find the ideal mix. Whether you're looking for the classic shimmer heard on many hits or some truly mind-blowing severe helicopter chops, piano stabs or backwards swells, the Shape Shifter can do it.
Seymour Duncan Shape Shifter Stereo Tremolo Pedal
Circuitry: Analogue signal path, stereo in/out, digital tremolo timing Bypass: True hard-wire bypass
Control Functionality:
-Depth: Continuously adjustable from 0 to 30dB
-Rate: Continuously adjustable from 0.5 to 15 Beats per second
-Rate/Ratio Switch: Changes functionality of Rate Control from direct linear adjustment of rate to a multiplication factor for tapped tempos. "¢ Shape (Duty Cycle): Continuously adjustable from 10% to 90%
-Wave: Continuously adjustable, sine to triangle to square waves
-Phase Control: Continuously adjust phase between left and right output channels from 0 degrees to 180 degrees
Input Impedance: 1 Meg Ohm
Output Impedance: 1.2K ohm
Max Output before Saturation: 2.5V RMS
S/N Ratio: 95dB
Frequency Response: Wideband; -3dB at 3Hz and 50 kHz THD: < 0.3% @ 1 kHz, 1VRMS
Noise referred to input: <-99dBV, 400Hz to 2kHz
Power: 9V battery or external 18V Regulated DC Adapter Current consumption: 13mA operate, 12mA bypass
Dimensions: 3.50" wide x 4.70" deep x 1.60" tall Weight: 0.9 lbs.
